•  FM Landing Valve is used to form a complete Wet Riser System for intense high pressure Fire Fighting Applications.

•  ISI Marked Landing Valve, as per IS:5290-1993, is designed for the primary Fire Fighting Application
• Body of the Valve and the Internals are tested at 300 psi or 21 Kg/cm
• Compact with Excellent Flow Characteristics
• Generally conforming to BS:5041 Part 1

• Double Headed Hydrant Valve are designed and manufactured as per IS:5290-1993
• Highly Durable and Corrosion Resistant
• Excellent Flow Characteristics

• The class F Pressure Regulating Valve combines features of a Hydrant V alve and Pressure Control Device.
• Designed for Applications like High Rise Buildings, High Pressure Lines in Oil & Gas, For Assemblies requiring different pressures for Optimum working, Long Water Mains etc
• Helps in maintaining Uniform Range of Outlet Pressure irrespective of its LocationEliminates the problems faced by the Fire Fighters of sudden surge and decline in pressure
• hindering the effective control of Hose Line.
• Expensive Pressure Relief Piping is eliminated
• Field Adjustable Pressure Regulator that could be tuned to meet Individual Floor level pressure requirements.
• Spring loaded Balanced Pressure reducing Mechanism.
• The main advantage of Pressure Regulating Valve is controlled outlet pressure irrespective of Inlet Pressure without compromising the Flow
• Gunmetal Construction for Corrosion Resistance and Sea Water Application
• Design and Construction confirming to BS:5041

Pressure Range

• Outlet 4.1 - 5.5 Bar (60 - 80 Lbs/in²)
    5.5 - 8.3 Bar (80 - 120 Lbs/in²)
• Inlet 4.8 - 20.7 Bar (70 - 300 Lbs/in²)

Connections

• Outlet 2 ½” Instantaneous female coupling to BS: 336
• Inlet (a) 1 ½” Flanged inlet suitable for ANSI - 150 Lbs, BS 4504 - Pn16, BS - 10 T able “H” or DIN-ND16.
    (b) 2 ½” Flanged inlet suitable for ANSI - 150 Lbs, BS 4504 - Pn16, BS - 10 T able “H” or DIN-ND16
    Blank Cap and Chain fitted as standard.

• Designed to reduce excess line Pressure.
• Simple and can be used a stand-alone pressure restricting device
• The opening of the Valve is Controlled which restricts the volume of water and thereby lowers the pressure of water
• Valves are similar to Standard Landing valves but with a specially designed mechanism incorporated into the stem and bonnet to limit how far the valve can be opened. The valve design has no ability to reduce outlet pressure under no-flow conditions.
• If low supply pressure conditions should arise the adjustable gauge stem can by overridden by removal of stop pin that would allow full opening of the valve and unrestricted flow of water .
• Unlike pressure regulating type valves, pressure restricting valves have no effect on the static pressure of a system.
• Gunmetal Construction for Corrosion Resistance and Sea Water Application
• Available in V alve Size 1.5 Inches and 2.5 Inches
• Inlet – Flanged or Threaded
• Outlet – Threaded / British Standard Instantaneous / Russian Gost / Storz

• Body Gun Metal or Aluminum Alloy or Cast Iron
• Inlet Two Instantaneous with NRV
• Outlet 4” Flanged
• Working Pressure10 Bar
• Test Pressure 23 Bar

• Body Gun Metal or Aluminum Alloy or Cast Iron
• Inlet Two Instantaneous with NRV
• Outlet 6” Flanged
• Working Pressure10 Bar
• Test Pressure 23 Bar

• Body Gun Metal or Aluminum Alloy or Cast Iron
• Inlet Two Instantaneous with NRV
• Outlet 6” Flanged
• Working Pressure10 Bar
• Test Pressure 23 Bar

• Body Copper Alloy
• Inlet ConnectionThreaded male Connection